| Inombolo yendawo | TCG121SVLQAPFA-AA20 |
| Uphawu | Kyocera |
| Ubungakanani | 12.1 |
| Isicelo | Industrial |
| Isigqibo | 800×600 |
| Ukuqamba | a-Si TFT-LCD, LCM |
| Ukuqaqamba | |
| CR | 360:1 |
| Imibala | 16.2M |
| Isibane ngasemva | WLED |
| Ujongano | CMOS |
| uphawu lwephaneli | Kyocera |
| imodeli yephaneli | TCG121SVLQAPFA-AA20 |
| ubungakanani bephaneli | 12.1" |
| uhlobo lwephaneli | a-Si TFT-LCD, LCM |
| isisombululo | 800(RGB)×600, SVGA, 82PPI |
| ifomathi ye-pixel | RGB Vertical Stripe |
| indawo yokubonisa | 246(W)×184.5(H) mm |
| ukuvulwa kwe-bezel | - |
| ubungakanani bamagqabantshintshi | 278.3(W)×207.5(H) ×12.8(D) mm |
| umphezulu | Antiglare, Hard coating (2H) |
| ukuqaqamba | 500 cd/m² (Typ.) |
| umlinganiselo wokuchasana | 360:1 (Typ.) (TM) |
| i-engile yokujonga | 85/85/85/85 (Typ.)(CR≥10) |
| imowudi yokubonisa | AWV, Normally Black, Transmissive |
| eyona mbono kwi | Symmetry |
| ixesha lokuphendula | 18/12 (Typ.)(Tr/Td) |
| bonisa imibala | 16.2M 50% NTSC |
| uhlobo lwesibane | WLED , 100K hours , With LED Driver |
| rhoqo | 60Hz |
| isikrini esibanjwayo | 4-wire Resistive Touch |
| Ubunzima bephaneli | 670g (Typ.) |
| isicelo | Industrial |
| ujongano lomqondiso | CMOS (1 ch, 8-bit) , 30 pins Connector |
| igalelo lombane | 3.3V (Typ.) |
| okusingqongileyo | Operating Temp.: -20 ~ 70 °C ; Storage Temp.: -30 ~ 80 °C |
| AA121SL01 | Mitsubishi | 12.1 | 800×600 |
| AA121SL12 | Mitsubishi | 12.1 | 800×600 |
| HT12X21-221 | HYDIS | 12.1 | 1024×768 |
| LQ121S1LG45 | SHARP | 12.1 | 800×600 |
| LQ121X3LG02 | SHARP | 12.1 | 1024×768 |
| LTD121C31S | TOSHIBA | 12.1 | 800×600 |
| LTD121EX1S | TOSHIBA | 12.1 | 1280×768 |
| LTM12C285 | TOSHIBA | 12.1 | 800×600 |
| NL10276BC24-13 | NLT | 12.1 | 1024×768 |
| TCG121SVLQAPNN-AN20 | Kyocera | 12.1 | 800×600 |